preparation method of ferromolybdenum powder with high molybdenum content

Nov 11, 2024 Leave a message

The traditional raw material for the production of ferromolybdenum powder is molybdenite. Before smelting, the molybdenum concentrate is usually oxidized and roasted in a multi-chamber kiln to produce calcined molybdenum ore with a sulfur content of less than 0.07%. Ferromolybdenum smelting is usually carried out by an out-of-furnace method using ferrosilicon containing 75% silicon and a small amount of aluminum particles as a reducing agent, and the molybdenum iron ingot is ground after cooling to produce ferromolybdenum powder. Ferromolybdenum powder prepared by this method generally contains 50~60% molybdenum, and the production of ferromolybdenum powder with more than 70% molybdenum content is still fraught with great technical difficulties.

 

In order to overcome the shortcomings of the existing technology, experts have developed a method for the preparation of ferromolybdenum powder with a high molybdenum content for powder metallurgy, which includes the following steps: 1, the use of iron powder and molybdenum powder as raw materials, with a molybdenum content of more than 70 wt% 2, Putting the mechanically mixed powder into the ball grinding tank, proportioning the grinding balls according to the weight of the added powder, and the mass of the grinding balls does not exceed 20 times the weight of the powder; 3, Putting the ball grinding tank on the ball mill, ball grinding control, and ball grinding control. Ball mill, ball grinding speed control in the range of 300-500 rpm, ball grinding time is 1-2 hours; 4, Alloy powder in hydrogen atmosphere under 500-600 reducing annealing.

 

According to the exemplary embodiment of the technology, the purity of the recovered iron powder or atomized iron powder in the raw material in step 1 is more than 98%, and the particle size is minus 100 mesh, and the particle size of molybdenum powder is less than or equal to 100m, and the purity is greater than or equal to 99%; the molybdenum content in ferromolybdenum powder is more than 70% by weight; Stage 1 is carried out according to the following method: with recovered iron powder or atomized iron powder and ultra-fine molybdenum powder as raw materials, mechanical mixing is carried out, the mixing method can be V-shaped, double cone or drum mixing mixer; Step 2 is carried out according to the following method: the mixed powder of molybdenum powder and iron powder is placed in a ball grinding container, then steel balls with a diameter of 10 mm, 5 mm and 3 mm are placed as grinding balls, and the mass ratio of grinding balls and powder does not exceed 20, 333, 601; the ball grinding container is sealed; The time for recovery and annealing in step 4 is 1. 5-2h.

 

Compared with the previous art, the method of preparing high molybdenum ferromolybdenum powder with this technology has the following essential features and significant progress: 1. Increasing the range of raw materials, most of the iron powders and ferromolybdenum powders on the market can be used as raw materials for application; 2. Reduce production cost and improve production efficiency. This technical solution has a simple process, low requirements for production equipment, and is suitable for industrial mass production; 3. The quality of ferromolybdenum powder is greatly improved, and the high molybdenum ferromolybdenum powder prepared using this technical solution has high molybdenum content and low oxygen content, and can be used to prepare alloy steels and high-performance powder metallurgy materials.