Ferro Vanadium 50
Ferro Vanadium 50 (FeV50) is the everyday vanadium addition for rebar and structural lines: 48–55% vanadium in a lump that dissolves on tap, priced so continuous charging survives thin mill margins. ZhenAn FeV50 ships in screened 10–50 mm and 10–100 mm fractions with lot-by-lot certification.
Where Does FeV50 Fit Among the Vanadium Grades?
FeV50 sits in the middle of the family: more vanadium per tonne than FeV40, a friendlier unit price than FeV80, and the analysis window around which ordinary rebar practice was written. For mills dosing modest vanadium targets continuously, the lower concentrate often lands cheaper per heat once freight and yield are counted - the arithmetic behind the standing description of FeV50 base properties.
The choice is always per-heat economics: grade, ladle size and target vanadium decide between 40, 50 and 80.
How Do Mills Charge FeV50 in Daily Practice?
Tap-add is standard practice: lump goes into the ladle during or right after tapping, dissolves within the ordinary holding window and needs no special equipment. Because recovery is stable, the addition is planned in kg per tonne against the grade target instead of padded with safety alloy. The application notes behind what FeV50 is used for cover the common charging patterns for rebar and section lines.
What Moves the Price You Pay for FeV50?
FeV50 quotations track vanadium pentoxide feedstock, steel-sector demand and export freight. Quotations are built per kg of contained vanadium or per tonne of alloy, so comparing offers means normalizing to the same vanadium basis before judging the number. The site's running commentary on ferro vanadium price trends lays out the drivers and how to read a quotation correctly.
Buyers with steady monthly volumes can ask for scheduled pricing instead of spot chasing - both routes are quoted on request.
Which Fractions and Packings Are Available?
10–50 mm is the standard export fraction; 10–100 mm suits larger ladles. Packing runs 100 kg drums for clean handling or 1 MT bulk bags where the melt shop prefers bulk charging. Every lot is screened and released with a certificate of analysis for V and residuals, so the material a shift charges matches the paper the quality office filed.
What Do FeV50 Buyers Ask Most?
FeV50 covers ordinary rebar targets economically; FeV80 wins when vanadium per tonne of steel rises or freight efficiency dominates. The grade-selection page compares both on one table.
Export supply starts from 1 MT; monthly schedules for continuous lines are routine.
Yes - send the grade and vanadium target; the kg-per-tonne calculation returns with the offer.
Certificate of analysis for V and residuals, packing list and works certificate; third-party inspection can be added.
FeV50 is a standing production line; availability by month is confirmed in the offer alongside current lots.
No - all fractions come from the same certified lot; sizing only changes dissolution behavior.
Request a FeV50 Quotation
Write to sales@zanewmetal.com with your tonnage, fraction and destination for a FeV50 offer with the current COA. Same-day replies on WhatsApp: +86 155 1882 4805.
Hot Tags: ferro vanadium 50, China ferro vanadium 50 manufacturers, suppliers
