Ferro Vanadium Nitride VN12 / VN16
Ferro vanadium nitride (FeVN) delivers vanadium and active nitrogen in one briquette: VN12 and VN16 grades dissolve predictably in the ladle and raise both elements together, which is why they anchor high-strength rebar and HSLA microalloying programs worldwide. ZhenAn FeVN ships as pillow briquettes in sealed drums, with nitrogen and vanadium certified on every lot.
What Is Ferro Vanadium Nitride and How Is It Made?
FeVN is produced by nitrating ferrovanadium fines and pressing them into briquettes, so each pillow carries vanadium and chemically bound nitrogen in a fixed ratio. The bound nitrogen is what distinguishes it from plain FeV: instead of relying on nitrogen pickup from the atmosphere or gas injection, the heat receives a measured dose alongside its vanadium. The process background is covered in the account of FeVN production and application.


VN12 or VN16: Which Nitride Grade Fits Your Heat?
The two grades carry different nitrogen payloads, and the choice follows the steel's nitrogen window and the V:N ratio the rolling schedule wants. VN16 packs more nitrogen per briquette, cutting the addition weight for high-nitrogen programs; VN12 gives finer dosing headroom where the nitrogen target sits lower. The trade-offs are laid out in the comparison FeVN vs FeV selection.
| Parameter | VN12 | VN16 |
|---|---|---|
| Nitrogen | 11–13% | 15–17% |
| Vanadium | 43–51% | 43–51% |
| Briquette weight | ~90–110 g | ~90–110 g |
| Typical addition | Lower-N programs | High-N rebar / HSLA |
Why Does FeVN Lift Vanadium Yield Above Plain FeV?
Vanadium nitride precipitates are the strengthening species rebar metallurgy is designed around, and the nitrogen carried in FeVN pushes precipitation toward fine V(C,N) instead of coarser carbides. The practical result mills report is a higher effective vanadium yield at the same strength target - less alloy per tonne for the same result. Lot data behind current briquettes is summarized with high-purity FeVN lots.

Which Steels Call for Nitride Alloying?
High-strength rebar to modern seismic standards, HSLA sections, and microalloyed long products are the core applications - anywhere the specification pairs a vanadium minimum with a nitrogen range. Briquettes go in at tap or in the ladle furnace, dissolve without violent reaction, and leave no floating residue when kept dry until charging.
What Do FeVN Buyers Ask Most?
Not a like-for-like swap: FeVN adds nitrogen alongside vanadium. Steels specifying nitrogen use FeVN; plain vanadium targets use FeV grades.
Typical rebar practice runs a few tenths of a kg of nitrogen per tonne; the exact dosing is calculated from the grade's V and N windows with the offer.
Sealed drums, dry warehouse; briquettes exposed to moisture lose nitrogen activity over time.
The lot COA states both vanadium and nitrogen plus residuals; sampling follows the briquette-lot procedure.
Yes - programs blend grades to hit a V:N ratio; the dosing sheet is prepared with the offer.
Export lots start from 1 MT in sealed drums; scheduled volumes for rebar lines are quoted monthly.
Request a FeVN Quotation
Send your grade, V and N targets to sales@zanewmetal.com for a VN12 / VN16 offer with lot COA. WhatsApp for a same-day reply: +86 155 1882 4805.
Hot Tags: Ferro Vanadium Nitride VN12 / VN16, China Ferro Vanadium Nitride VN12 / VN16 manufacturers, suppliers









