Ferro Vanadium 60
Ferro Vanadium 60 (FeV60) fills the middle rung between the rebar workhorse and the 80% concentrate: 58–65% vanadium in a free-flowing lump, for heats that need more vanadium than FeV50 delivers but do not justify FeV80 freight. Lots ship screened and certified, ready for ladle or furnace charging.
What Position Does FeV60 Hold in the Grade Ladder?
FeV60 is the balance grade: vanadium content high enough to cut the tonnage needed per heat versus FeV50, while unit pricing stays below the 80% concentrate. Its chemistry window and physical behavior are summarized in the standing profile of FeV60 base properties, which mills use as the quick reference when a heat specification lands between the two neighbors.
| Property | FeV50 | FeV60 | FeV80 |
|---|---|---|---|
| Vanadium | 48–55% | 58–65% | 78–82% |
| Typical use | Rebar, sections | Alloy structural, forgings | HSLA, tool, spring |
| Dissolution | Fast | Fast–moderate | Moderate |
Which Applications Favor FeV60?
Alloy structural steels, forgings and wear-resistant castings that specify mid-range vanadium are the natural FeV60 territory - the per-heat tonnage is small enough that the concentrate premium never pays back, but the target sits above what FeV50 dosing wants to carry. The application survey in what FeV60 is used for lists the steel families and their typical vanadium windows.
FeV60 or FeV80: How Do Mills Decide?
The decision usually comes down to contained-vanadium freight and ladle practice: when the vanadium target per tonne rises, the 80% concentrate cuts the alloy tonnage, drum count and charging time; at moderate targets, FeV60 keeps the invoice lower with the same certification. A structured comparison lives in the FeV grade difference guide, which walks the same decision for all grades in the family.
What Do FeV60 Lots Ship With?
Every lot carries a certificate of analysis for vanadium and residuals, an itemized packing list and the works certificate; third-party inspection can be added before loading. Fractions are screened at packing - 10–50 mm standard, 10–100 mm on request - so dissolution behavior matches the melt shop's charging plan rather than fighting it.
What Do FeV60 Buyers Ask Most?
At moderate vanadium targets in small-to-mid heats, FeV60 keeps alloy tonnage and invoice lower; the break-even math is part of the offer.
10–50 mm lumps in 100 kg drums or 1 MT bags; 10–100 mm on request.
FeV60 runs on a standing production schedule; current lots and dispatch windows are confirmed in the offer.
COA for V and residuals, packing list and works certificate; optional third-party inspection before loading.
Yes - mixed-grade consolidations are routine; drums are marked by lot and grade.
It can serve cast irons needing mid-range vanadium; send the target and the calculation returns with the offer.
Request a FeV60 Quotation
Send your vanadium target, fraction and tonnage to sales@zanewmetal.com for a FeV60 offer with the current lot COA. WhatsApp for a same-day reply: +86 155 1882 4805.
Hot Tags: ferro vanadium 60, China ferro vanadium 60 manufacturers, suppliers
