A Brief Introduction To Industrial Silicon

Jan 20, 2025 Leave a message

Due to different uses, industrial silicon is classified into various specifications. According to the iron, aluminum, and calcium content of metalloid silicon, metallic silicon can be divided into various grades, such as 553, 441, 411, 421, 3303, 3305, 2202, 2502, 1501, 1101, and so on. The additional products of non-metallic silicon are microsilica powder, edge silicon, black silicon, metallic silicon slag, etc.

The raw materials for industrial silicon smelting are mainly silica dioxide and carbon reducing agents. Since the content of aluminum, calcium and iron in industrial silicon is strictly limited, the requirements for raw materials are also particularly strict. In silica, SiO2>99.0%, Al2O3<0.3%, Fe2O3<0.15%, CaO<0.2%, MgO<0.15%; the particle size is 15-80mm.
The principles for selecting carbon-containing reducing agents are: high fixed carbon content, low ash content and good chemical activity. Low-ash petroleum coke or pitch coke is usually used as a reducing agent. However, due to the low resistivity and weak reactivity of these two types of coke, part of the petroleum coke must be replaced by charcoal (or wood bars) with low ash content, high resistivity and strong reactivity. For batch sintering, a little low-ash bituminous coal should also be added. It should be noted that excessive or complete use of charcoal will not only increase the cost of production, but will also lead to disturbance of the furnace working conditions, such as burning and destruction due to poor sintering of the material surface, which will make it difficult to form a blast furnace. In the high-temperature reaction zone, a SiC layer is easily formed on the furnace hearth, making it difficult to drain the steel.