Preheating Of Ladle Nozzle

Mar 31, 2025 Leave a message

Ladle nozzle preheating is an important process before continuous casting or die casting.

 

The main purposes are:

Preventing cold steel from solidifying: to avoid local solidification of the molten steel when it comes into contact with the cold nozzle, which can cause blockage or unstable flow.

Reducing thermal shock damage: preheating can reduce cracks or spalling of the nozzle refractory material caused by sudden temperature changes.

Improving safety: to avoid molten steel splashing (for example, an un-preheated nozzle in contact with molten steel may cause explosive vaporization).

I. Preheating methods

1. Gas/natural gas baking

method:

Use a gas burner to directly bake the nozzle from below or the side, with a temperature of 1000–1200°C (depending on the nozzle material).

The preheating time is usually 30–60 minutes (longer for large ladles).

Advantages: Even heating, suitable for all types of nozzles.

Disadvantage: high energy consumption, attention must be paid to the alignment of the flame to avoid local overheating.

2. Electric heating (resistance/induction heating)

Method:

the nozzle is heated by a resistance wire wound around the nozzle or an induction coil, with precise temperature control (up to 1200°C or more).

Advantage: temperature can be controlled, no open flame, suitable for high cleanliness steel grades.

Disadvantage: high equipment cost, complex maintenance.

3. Preheating with red-hot molten steel (auxiliary baking)

Method:

A small amount of red-hot molten steel (or the remaining steel from the previous furnace) is used to quickly raise the temperature before the steel is poured.

Advantages: Saves time and is suitable for fast-paced production.

Disadvantages: Higher risk (strict operation is required to avoid molten steel splashing).

4. Combined preheating

gas baking + electric heating: The temperature is quickly raised with gas, and then maintained with electric heating, to achieve both efficiency and stability.