How Much Raw Material Does It Take To Smelt One Ton Of Ferro Silicon 75

Nov 06, 2024 Leave a message

Calculation of the raw materials required to produce 75 ferrosilicon:

(1) Amount of Silica
Added The amount of silicon entering the ferrosilicon from 100 kilograms of silica is:
100×SiO2%×molecular weight Si/molecular weight SiO2×silicon recovery factor.
Since the silica content of silica is 98%, the silicon recovery rate is 92%. Substitute in the above formula:
100×98%×28/60×92%=42kg
That is, the amount of silicon entering the ferrosilicon when smelting 75 ferrosilicon from 100 kilograms of silica is 42 kilograms.
From 75 ferrosilicon, it is possible to smelt:
42÷75% = 56 kg.
In other words, to smelt 56 kilograms of 75 ferrosilicon, 100 kilograms of silica and the corresponding amount of coke and steel waste are needed.
The amount of silica required to produce one ton of 75 ferrosilicon is:
100/56×1000=1786≈1800kg

 

(2) Amount of Coke and Steel Chips
Added For 100 kilograms of silica, 54 kilograms of coke and 13.6 kilograms of steel chips are required. The amount of coke required to produce one ton of 75 ferrosilicon is:
1800×54/100=990 kg.
The required amount of steel chips is:
1800×13.6/100=238≈240kg

The above calculation shows that approximately 1,800 kilograms of silica, 990 kilograms of coke, and 240 kilograms of scraps of steel are required to smelt one ton of 75% ferrosilicon.