A recarburizer is a product used to increase the carbon element (C) content. Throughout the steelmaking process, various factors lead to a decrease in dissolved carbon components, which degrades the quality of the finished stainless steel sheet. Therefore, steel mills often purchase recarburizers to solve the problem of reducing carbon content in the steelmaking process. There are many types of recarburizers, including graphite recarburizers, petroleum coke recarburizers, forging coal recarburizers, etc. Graphite recarburizers are a key application for the rapid conversion of cast iron to graphite. Graphite recarburizers also have the function of reducing the recarburization time and improving the actual recarburization effect. Uses of petroleum coke recarburizers: The use of petroleum coke recarburizers provides reasonable temperature control. The secondary incineration of petroleum coke can be used to increase the income level of the metallurgical industry. Petroleum coke oven recarburizers have the same application as the natural environment of the fine metallurgical industry. Forged coal carbureizers have reasonable applications for recarburization, and forged coal carbureizers have the goal of shortening the time of the recarburizing stage.
Advantages of Carburizer: Carburizer is widely used and has some application in steelmaking, forging, smelting and other industries. It has high physical properties and can better consider the advantages of the production process. The iron carbureizer in this area avoids low-temperature cast iron and grey. The specific application of the carbureizer is mainly reflected in the entire production process. There are many advantages that can reasonably reduce the carburizing time, improve the actual carburizing effect, increase the amount of steel scrap added, use resources efficiently, and reduce production costs.
1. Furnace Input Method: Suitable for induction heating furnace melting. According to the provisions of the processing technology, the actual application method varies slightly from enterprise to enterprise. In medium-frequency electric furnace smelting, a heating furnace with a lower position can be added according to the preparation requirements or carbon equivalent, and the recovery rate can reach more than 95%; Molten iron melts, if there is no sufficient adjustment of the carbon separation diagram in time, with pure furnace slag, first add a carbureizer, according to the temperature of the molten iron, electromagnetic induction mixing or artificial mixing of carbon dissolving digestion and absorption, the recovery rate is about 90% if the ultra-low temperature carbonization process is chosen, that is, the recycling of garbage only partially molten molten iron under low temperature conditions, all carburizers are added at the same time, and the other is subjected to its molten iron with solid and recycled waste, and pressed into the surface of the molten iron. Thus, the carbonation of molten iron reaches more than 1.0%.
2. Spraying graphite powder in the outer bag of the furnace, using graphite powder as carburizer, the amount of blast is 40 kg/t. As the carbon content of molten iron slowly increases, the carbon utilization rate decreases. Graphite powder spraying for carburizing generally uses nitrogen as the medium, but in industrial production environment, it is more convenient to use compressed air, and the oxygen in the air is compressed to compensate for the chemical changes when the temperature drops, and the restoration of the enterprise atmosphere is conducive to improving the actual carburizing effect. Carburizing during iron discharging: 100-300 graphite powders can be put into bags or washed in iron cans with flow. Once the iron is released, it is completely stirred to melt the carbon, digest and absorb as much of it as possible. The carbon recovery rate is about 60%.
carbon raiser application and specific usage
Dec 05, 2024
Leave a message



