Price Table (FOB Tianjin Port)
| Product | Grade | Price Range (USD/MT) | Movement | Incoterm | Port |
|---|---|---|---|---|---|
| Ferrosilicon | 75 | 1090-1120 | Unchanged | FOB | Tianjin Port |
On December 30, 2025, the export reference for Ferrosilicon 75 (FeSi75) is USD 1090-1120 per metric ton FOB Tianjin Port, and the range is unchanged in today's update.
When FeSi75 pricing is flat, I usually read it as a market "pause" rather than a lack of information. In ferrosilicon, the supply chain is cost-sensitive and operationally constrained, so stable prices often mean the market is temporarily aligned on four variables: production costs, operating rates, inventory pressure, and downstream purchasing rhythm.
Why FeSi75 often holds steady (what's happening under the surface)
1) Electricity and reductant costs set the floor.
Ferrosilicon is energy-intensive. Even when demand is quiet, producers rarely chase prices below their cost structure for long. A stable quotation range often reflects stable power inputs and relatively predictable reductant costs (such as carbon reductants) over the near term. When that cost floor is clear, prices tend to consolidate rather than swing.
2) Operating rates adjust faster than many buyers expect.
FeSi producers can manage output by adjusting furnace utilization. If orders slow, supply can tighten quickly enough to prevent an obvious price drop. If orders pick up, producers may prioritize contract volumes before they widen export offers. This flexibility is one reason you can see a stable price band even when sentiment feels mixed.
3) Inventory is the silent driver.
In ferrosilicon, inventory pressure shows up first in sizing, packing readiness, and lead time (before it shows up as an aggressive price cut). When inventory is balanced, prices can remain steady while suppliers compete instead on delivery reliability and specification consistency.
4) Steel-side purchasing is often "rhythmic."
Many steel and foundry buyers purchase by plan cycles. In a stable period, procurement teams tend to lock in predictable supply for the next window rather than react to every minor headline. That behavior supports a tight range like today's.
A technical refresher: what FeSi75 is (and why buyers choose it)
FeSi75 is a ferrosilicon alloy grade typically selected for deoxidation and alloying in steelmaking and in foundry practices where a higher silicon input per ton is preferred. In practical terms, FeSi75 can reduce the addition weight required to deliver the same silicon contribution compared with lower grades, which helps some plants standardize additions. But performance is not only about the silicon percentage. Two shipments at the same "grade" can behave differently if the impurity pattern, sizing distribution, or fines content is inconsistent.
What I recommend you specify before you place an export order
If you want FeSi75 to behave predictably in your furnace, specify these points up front:
- Chemistry consistency and a batch-linked COA. Ask for a COA that matches the shipping batch. If you have red-line limits (commonly elements such as P, S, C, Al, Ca), list them clearly so the supply is matched to your process.
- Lump size and fines control. Feeding stability depends on sizing. A clean, consistent lump range reduces dust loss and improves melting behavior. If fines are a recurring pain point in your plant, make the fines tolerance explicit rather than implied.
- Packing that protects during sea transit. Big bags and smaller bags each have operational advantages. The best choice is the one that fits your unloading method and storage conditions while protecting against moisture and handling damage.
- Shipment window and documentation discipline. FOB terms still require coordination. A well-run export order is one where the paperwork is complete and consistent: commercial invoice, packing list, bill of lading, and COA, with any origin documentation aligned to your destination's customs practice.
In a market that is not moving sharply, these details are usually what separates a smooth repeat supply from a one-off transaction that creates follow-up problems.
FAQ
Q1: What is the current FOB Tianjin Port price for Ferrosilicon 75?
A: As of December 30, 2025, FeSi75 is quoted at USD 1090-1120/MT FOB Tianjin Port.
Q2: Today's price is unchanged. Does that mean I should wait?
A: Not necessarily. When prices are flat, the bigger savings and risk reduction often come from locking the correct spec (chemistry consistency, sizing, packing) and a reliable shipment window.
Q3: What makes FeSi75 different from lower ferrosilicon grades in practice?
A: FeSi75 provides a higher silicon input per ton, which can reduce addition weight for the same silicon contribution and help standardize alloying practice, depending on your process.
Q4: What should I check on the COA before shipment?
A: Confirm the silicon range and the impurity limits that matter to your application, and ensure the COA is traceable to the shipping batch.
Q5: Why does lump size matter for FeSi75?
A: Size distribution affects feeding stability, melting behavior, and dust loss. Consistent lumps with controlled fines improve repeatability in production.
Q6: What information do you need to prepare a shipment-ready offer?
A: Quantity, preferred lump size range, any impurity limits, packing preference, destination port, and your target shipping window.
About Our Company
We supply from a factory-direct model with stable monthly capacity and a production site of about 30,000 m². We export to more than 100 countries and regions and have served 5,000+ customers. Our sales team stays close to market dynamics and helps buyers align specifications, documents, and shipment planning. We supply ferrosilicon, silicon metal, and other metallurgical products.